|
Our Shade Tree Mahogany
Porch Swing is classic and comfortable, with a seat that curves
beneath you and a back that flows behind you to provide maximum
comfort and support. Exposed stainless steel square-drive
screws set against smooth as glass, clear coated Mahogany is
breathtaking. To ensure durability and a classic
appearance, the Shade Tree Mahogany Swing features stainless
steel bolts and screws, brass fittings in the arms (to protect
the wood from being damaged by the hanging chain) and wood
plugged screw holes to provide smooth surfaces. The rounded seat
and back slats do feature exposed stainless steel square-drive
screws for visual contrast but rest assured, they are flush with
the seat so they will not catch or scratch. Seat and back
braces are substantial, finished out to 1 ½ inches. 3/8 inch
stainless steel carriage bolts are used to secure the back and
the seat of the swing as well as to connect the hanging chain.
Timeless and traditional, Mahogany is a hardwood and has a
beautiful grain and a reddish brown color, which darkens over
time. It is also very durable, insect and rot resistant
and is regarded by many as the premiere wood for making fine
furniture. We recommend that it be sealed with oil or a
clear coat to show off the rich grain and color. The clear
coat is sprayed on, not brushed, for a smooth even surface and
will slightly darken the wood's natural color, seal out moisture
and provide a smooth surface to wipe clean. The oil finish
seals and protects while providing a non-glossy surface to show
off the wood grain. The swing may also be left
natural and will weather to a light silvery gray. We
recommend that you periodically wash your swing using mild soap
and water to remove dirt or stains.
Please note: The clear coat finish selection is intended for
placement on covered patios and porches rather than direct
sunlight.
-
Shipped fully
assembled
-
Four Ft. measures
56"L x 28"D x 24"H Weighs 100 lb.
-
Five Ft. measures
68"L x 28"D x 24"H Weighs 120 lb.
-
Six Ft. measures
80"L x 28" D x 24" H Weighs 130 lb.
-
Seat dimension is
17.5" Deep
-
Stainless steel
screws and carriage bolts, brass fittings in arms
-
Hanging chain
zinc-plated, 3/16", 24 ft. Stainless steel available
-
Hanging hooks
zinc-plated quick links
-
Add a set
of Swing-Mate Springs - click here
|